Call: (216) 267-7310
Email: contact@fabriform1.com
Unimat Revetment
Fabriform Unimat fabric formed concrete revetments are characterized by a slightly dimpled surface. Permeability approximates that of high quality paving. Criteria for selection of Unimat revetment is the same as that employed in determining the thickness of conventional paving.
Unimat revetments provide protection for ditches, creeks, reservoirs, canals, liner protection, holding ponds, bridge abutments and any where else hard armor protection is required.
When required, weep tubes are installed to allow the relief of hydrostatic pressure uplift.
Key Benefits:
• Minimum hydraulic friction and maximum impermeability
• Ease of installation above and below water
• Economical, adaptable and durable revetment system
Weep Tube Assembly. Close-up of a weep tube installed in 4” Unimat.
Adaptable Unimat is easily cut around water-control pipes.
Euclid Creek — 8” Unimat lining install in 1980's protecting a large channel in Ohio.
Euclid Creek 15 years later. Still protecting the flood control channel.
Unimat Installation incorporating weep tubes at a Florida phosphate mine.
4” Unimat Revetment. Over 600,000 square feet of Unimat protects a reservoir in Texas.
Perimeter Channel Lining. Large perimeter channel in Arizona protected by Fabriform Unimat.
Perimeter Channel Lining — this project demonstrates the suitability of Fabriform for large-scale projects.
The Fabriform name and logo are trademarks of
Construction Techniques, Incorporated.
© Construction Techniques, Inc. All Rights Reserved.
Web Site Terms of Use and Privacy Policy
